CNC wood engraving machines are widely used in furniture manufacturing, woodworking, and the advertising industry. Proper operational knowledge can significantly enhance efficiency, reduce waste, and ensure safety.
Operation Steps
-
Preparation and Startup
-
Confirm the proper connection between the engraving machine and computer.
-
Turn on the computer followed by the CNC machine power.
-
Enter the numerical control interface after system startup.
-
Machine Resetting
-
Upon initial startup, perform a mechanical reset. Click the confirm button as prompted, and the machine will automatically return to its mechanical origin.
-
Checking I/O Status
-
Inspect input and output signals to ensure no faults exist before proceeding.
-
Loading the Processing Program
-
In the operation interface, select “File (F)” — “Open and Load (O)” to select the desired processing file.
-
After loading, click “Automatic” to verify the loaded program.
-
Set Workpiece Origin
-
Manually move the X and Y axes to the starting position on the workpiece and set this position as the workpiece origin.
-
Begin Processing
-
Confirm the accuracy of the origin setting and initiate the automatic processing program.
-
Closely monitor the machine operation during processing to prevent unexpected incidents.
Important Notes
-
Regularly inspect and maintain guide rails and copper wheels.
-
Ensure the flatness of the worktable, especially after long-term usage.
Following these steps ensures the safe operation and maintenance of CNC wood engraving machines, enhancing production efficiency and reducing operational risks.